Read-only serial test
Polaris Timer Test
How to use this
- Open this page in Chrome or Edge on the laptop that has the FarmTek cable. It will not work in Safari, Firefox, or on a phone.
- Plug in the timer cable, then click Connect and pick USB Serial Port (COM3).
- Break the eyes (or press Start/Stop on the Polaris) to send a time. If nothing appears, change Baud and click Connect again. Try 4800 first, then 9600.
This page only reads from the timer. It does not write to the Polaris and it does not change the Arena app. FarmTek has not published the raw serial format, so the “parsed time” below is a best guess from numbers in the text.
Connection
Line view
One entry per CR or LF. This is the most useful view once a baud rate is right.
Raw log
Each chunk as it arrives, with a timestamp, text, and hex. Keep this if you send a log for the Arena hookup.
What we know about the format
FarmTek has not published the Polaris raw serial baud or line format on its computer-interface page or in the Timer Interface and Polaris manuals we checked. Official docs describe interface types (Standard Output, TAG Heuer, JAC, RaceAmerica T-Link) and what FarmTek’s Windows keystroke software types into a spreadsheet, not the bytes on the wire.
- 4800, 8 data bits, no parity, 1 stop bit is the default on this page because ShowGrounds and Skunkware SHOWJUMP32 both tell users to set the Polaris Printer Type to “ASCII Float/Hrn” (or “ASCII Float”) at 4800 baud, then open the computer port as 4800 8-N-1. Sources: ShowGrounds Polaris configuration; TimingGuys / Skunkware, June 2002.
- 9600 8-N-1 shows up when the timer’s Interface Type is set to TAG Heuer (a 2024 hobbyist capture) or when software talks to the JAC / T-Link emulations. Try 9600 if 4800 is silent. Sources: muki.gg; SidewaysData; Finish-Time.
- FarmTek manuals: Computer Interface Cable, Timer Interface user’s manual (filename spelling is FarmTek’s), Polaris Autocross instructions (Interface Type), manual index.
On the Polaris itself (from those third-party guides, not FarmTek)
For the 4800 ASCII path, those guides say: Setup → (from Exit Setup, Eyes ON) → Printer Type → ASCII Float/Hrn → 4800 Baud. FarmTek’s Autocross manual also has Setup → Interface Type, used for Standard Output or a third-party emulation. We have not confirmed the menus on this console.